Loading Has Never Been Easier!

AUN 100

This is the shorter ramp and it is used for street bikes or more compact motorcycles around 2 meters total length. Many clients use this one mounted sideways in RV's or across a trailer bed/pick-up truck cargo bed. Although it is shorter, it can be equipped with extenders to reach down to the ground from 1,3 meters height max (other heights available upon request). It is also very popular with vans.

AUN 150 "HYBRID"

This ramp uses the short base ramp of the AUN 100 and the long tilt ramp of the AUN 200. It is used by clients having pick-up trucks with a short cargo bed but a high loading height, like Jeep Gladiators or crew cab Raptors. The shorter ramp can be cut to the exact length of the cargo bed with the tail gate down. Then it will work very well and it will even load bikes that are longer than the truck's cargo bed with the tailgate down, so that there is no overhang, and no unnecessary load on the tailgate.

 The AUN 150 will reach down to load motorcycles from a height of 90cm. It can be equipped with extenders such as the AC 001 so that it can be used with loading heights up to 1,5 meters.

AUN 200

This is the standard sized ramp (2500 mm) used to load motorcycles into standard pick-up trucks with a load height of 90cm and a cargo bed + tailgate down length of around 2.5 m. It will work on most standard trucks without any modifications. However we do advise to cut the base ramp to match the length of the cargo bed + tail gate down. The tilt ramp can stay as it is.

​Can be used with long bed trucks too, where the AC 004 tailgate adapter can be used to close the tailgate after loading the bike.

 It can be equipped with many accessories, to extend load height or to minimize load angle.

AUN RAMPS

  • AUN 200
    Regular price
    $3,700.00
    Sale price
    $3,700.00
    Regular price
    Unit price
    per 
    Sold out
  • AUN 250 Split Kit
    Regular price
    $925.00
    Sale price
    $925.00
    Regular price
    Unit price
    per 
    Sold out
  • AUN 250 Folding Ramp
    Regular price
    $4,995.00
    Sale price
    $4,995.00
    Regular price
    Unit price
    per 
    Sold out
  • AUN - 100
    Regular price
    $3,550.00
    Sale price
    $3,550.00
    Regular price
    Unit price
    per 
    Sold out
  • AUN 150 "HYBRID"
    Regular price
    $3,640.00
    Sale price
    $3,640.00
    Regular price
    Unit price
    per 
    Sold out

1212 lbs & up to a height of 59In

Load up your valuable motorcycle with ease, and in minutes, be on your way traveling on to new trails in no time, no trailer needed. For Pickups, Vans, Trailers, Motorhomes and more.

Strength

Engineered with Aerospace grade T6 6061 aluminum rails. Powder coated supporting steel framework (orange) Capable of handling static loads up to 1200 lbs for servicing bike, Slides straight in/out of vehicle with little effort.

Worm Drive

Fin cooled, oil lubricated worm gear drive Dual 5000 lb. loading straps Powered by 18V cordless drill with 3/4" socket Hydraulic cylinder assisted tilt feature/

Wheel Chock

Fully adjustable to accommodate almost any size wheel and tire combo. Adjustments are quick and simple the tie down "T"-bar adds no increased load on forks.

Fat Tires

Fat tire friendly! Accommodates up to a 300mm rear tire our tire guide is a must have (optional accessory) to safely guide rear tire onto ramp

Low Ride Height

The AUN Raises the bike only 2 1/2" off surface of the cargo bed, allows ramp to be used with vans with low overhead Improved COG (Center Of Gravity) compared to other models on the market.

Load Angle

It can load up to 1200 lbs up to 38" height (added extension, sold separately, can allow up to 60" load height) No more nightmares of riding $$$$ bike in/out of vehicle

The Features

AUN 250 Folding Ramp

Accessories

  • AC 012 Boltless Attach kit
    Regular price
    $480.00
    Sale price
    $480.00
    Regular price
    Unit price
    per 
    Sold out
  • AC 004 Tailgate Adapter
    Regular price
    $480.00
    Sale price
    $480.00
    Regular price
    Unit price
    per 
    Sold out
  • AC 001 Tilt Frame Extender
    Regular price
    $480.00
    Sale price
    $480.00
    Regular price
    Unit price
    per 
    Sold out
  • AC 008 Cargo Loader Plate
    Regular price
    $900.00
    Sale price
    $900.00
    Regular price
    Unit price
    per 
    Sold out
  • AC 006 Snowmobile Adapter
    Regular price
    $350.00
    Sale price
    $350.00
    Regular price
    Unit price
    per 
    Sold out
  • AC 023 Chopper Extender
    Regular price
    $380.00
    Sale price
    $380.00
    Regular price
    Unit price
    per 
    Sold out
  • AC 005 Three Wheel Scooter Adapter
    Regular price
    $550.00
    Sale price
    $550.00
    Regular price
    Unit price
    per 
    Sold out
  • AC 003 Main Frame Extender
    Regular price
    $285.00
    Sale price
    $285.00
    Regular price
    Unit price
    per 
    Sold out

Easy Install

The ramp joiners are movable in case you need to attach it to strongpoints. However the ramp can be attached without drilling holes, by using the AC 12 boltless attach kit and standard ratchet straps together with the tie-downs of your vehicles cargo bed. 

Can't wait to see it in action Its coming in the mail next week; looks like a great concept for guys like me...

Brad

Purchased a Hayabusa from a buddy and this has been absolutely heaven to have. My back is thanking me!!

Lawrence

I clicked on all skeptical, but this is impressive. The fact that you can load more than just a mc. And it’s not permanently bolted to ones truck, genius

Isaiah V

SHipping

Shipping & Handling Not Included

Shipping and handling is not Included for all Load N Go MC Products .Buyers must obtain a quote from Load N Go MC as shipping is at cost to the buyer and it is not calculated within our online store. Please contact us here Loadngomclifts@gmail.com for all shipping inquiries.